M-F: 8:30–5pm Sat: 9–noon
If the paint isn’t cracked or chipped and the metal isn’t sharply creased, paintless dent repair (PDR) is usually the better choice. It keeps your factory paint, typically takes hours instead of days, and usually costs less. If the paint is damaged, the panel is plastic, or the metal is torn or badly stretched, you need traditional body and paint repair.
The quick rule of thumb
DAMAGE
PDR
BODY&PAINT
Paint intact, smooth dent, metal panel
✓
✗
Paint cracked, chipped or scratched to the primer
✓
✗
Plastic bumper cover (PDR only works on metal)
✓
✗
Sharp crease or dent on the very edge of a panel (sometimes PDR first to reduce how much filler and paint is needed)
✓
✓
The only way to know for sure is to have a technician look at it in person. Dentco’s estimates are free.
PDR reshapes the metal from behind, so the paint never has to be touched. Traditional repair fills and repaints the damaged area.
A trained technician reaches behind the panel with specialized rods and tools. They massage the metal back to its original shape, a little at a time, while checking it under special lights. Your factory paint stays exactly as it left the factory.
vs.
The technician sands the area down, pulls or hammers out the dent, and smooths it with body filler. Then the panel is primed, color-matched, painted and clear-coated, and the paint has to cure. Nearby panels are often blended so the new color matches.
PDR works when the paint is undamaged, the panel is metal, and the technician can reach the back of the dent.
✓
The paint isn’t cracked, chipped or scratched through. Light surface scuffs can often be polished out
✓
The panel is metal: doors, fenders, quarter panels, hood, roof or trunk lid.
✓
The dent is smooth and rounded, not a sharp, deep crease.
✓
It isn’t right on the edge of a panel, where the metal is double-layered.
✓
The back of the dent can be reached, sometimes by removing a tail light, trim or headliner.
Common PDR jobs: door dings from parking lots, shopping cart dents, hail damage, and small dents from balls, branches or garage mishaps.
Aluminum panels, common on Teslas, many trucks and luxury cars, can usually be repaired with PDR too. Aluminum is harder to work, so it can take longer and cost more
You need body and paint when the finish is broken or the metal can’t be pushed back cleanly.
Cracked, chipped or deeply scratched paint. Once the paint is broken, it has to be refinished to protect the metal from rust.
Plastic parts. Most bumper covers, mirror caps and some lower panels are plastic, so PDR doesn’t apply.
Sharp creases, torn or badly stretched metal. The metal can’t return to its original shape on its own.
Damage on panel edges or seams, where there’s no access from behind.
Collision damage with misaligned panels, broken parts or structural damage.
Many repairs use both. PDR can bring a dent most of the way back, which means less filler and a smaller painted area.
Paintless dent repair
Traditional body and paint
Typical Dentco price
PAINTLESS DENT REPAIR
$400-$2000
TRADITIONAL BODY AND PAINT
$2000-$5000
Typical time
PAINTLESS DENT REPAIR
A few hours, often same day
TRADITIONAL BODY AND PAINT
Usually several days (filler and paint need to cure)
Factory paint
PAINTLESS DENT REPAIR
Kept 100% original
TRADITIONAL BODY AND PAINT
Refinished, often with blending into nearby panels
Color match
PAINTLESS DENT REPAIR
Not an issue
TRADITIONAL BODY AND PAINT
Must be matched; can age differently over time
Body filler
PAINTLESS DENT REPAIR
None
TRADITIONAL BODY AND PAINT
Often Used
Shows on a paint meter
PAINTLESS DENT REPAIR
No
TRADITIONAL BODY AND PAINT
Yes, refinished panels read thicker
Works on plastic
PAINTLESS DENT REPAIR
No
TRADITIONAL BODY AND PAINT
Yes
Works if paint is cracked
PAINTLESS DENT REPAIR
No
TRADITIONAL BODY AND PAINT
Yes
PDR repair times per Plymouth Rock Assurance: most repairs take a few hours, some a full day.

Original paint is part of what a car is worth, and PDR is the only dent repair that keeps all of it.
Resale and trade-in value. Dealers and careful buyers often check panels with a paint thickness meter. A refinished panel reads thicker, and it raises the question of what happened to the car.
A perfect color match. Factory paint is applied and baked on the assembly line. Even an excellent refinish can look slightly different in some light or age differently over the years.
No filler to crack or shrink later. PDR leaves nothing behind but the original metal and paint.
Leasing. Small dings can be charged at turn-in. PDR before your lease ends is often cheaper than the lease-end damage charge.
If you’re paying for the repair yourself, PDR also keeps the cost low enough that an insurance claim usually isn’t worth it. See out-of-pocket vs. insurance.
We look at your car in person and recommend the repair that gives the best result for the least money, PDR whenever it makes sense.
1
Bring the car by or call. A technician inspects the damage under proper lighting and reading equipment.
2
We check the paint, the metal and the access. That tells us whether PDR, body and paint, or a mix of both is right.
3
You get an exact price and timeline. No obligation, and no surprises.
Why drivers choose Dentco
- 5 stars across 178 Google reviews.
- PDR and full body and paint under one roof, so we have no reason to push one over the other.
Dentco Autobody Repair · 26945 Cabot Rd #103, Laguna Hills, CA 92653 · (949) 997-3211.
Often, yes. PDR skips sanding, filler, primer and paint, so it uses fewer materials. Large or hard-to-reach dents and aluminum panels take more time and cost more. When PDR is possible, it is usually the less expensive option, and it keeps your factory paint.”
Most PDR repairs take a few hours, and many are done the same day, with large collision PDR possibly taking days. Traditional body and paint usually takes several days because filler and paint need time to cure.
No. PDR needs access to the dent, a metal panel and intact factory paint. Cracked paint, plastic bumpers, sharp creases and damage on panel edges add cost and time.
Not when it’s done by a skilled technician on a suitable dent. The metal is reshaped slowly from behind and sometimes on top, and the factory paint stays intact. Older or previously repainted panels carry more risk, and we’ll tell you before we start.
Often, yes. Aluminum is harder to reshape than steel, so it takes more time and costs more, but many aluminum dents can still be repaired without paint.
It often can. Buyers and dealers often check paint thickness with a paint gauge, and a refinished panel can raise questions about past damage. Keeping the factory paint and parts with PDR avoids that.
Stop by 26945 Cabot Rd #103 in Laguna Hills. A technician will look at the damage in person and tell you exactly which repair it needs and what it costs.
Whether PDR is possible depends on the specific damage. Final recommendations and prices are given after an in-person inspection.